DanBrother的部落格

Command for Verify Entire Grid Infrastructure Installation:

To identify the mappings between the intefaces, IP addresses, and subnets, run the following command:
cluvfy comp nodecon -n all

Verifying node connectivity

Checking node connectivity...

Checking hosts config file...

Verification of the hosts config file successful

Node connectivity passed for subnet "192.168.5.0" with node(s) rac3,rac2,rac1
TCP connectivity check passed for subnet "192.168.5.0"

Node connectivity passed for subnet "169.254.0.0" with node(s) rac3,rac2,rac1
TCP connectivity check passed for subnet "169.254.0.0"

Node connectivity passed for subnet "10.1.5.0" with node(s) rac3,rac2,rac1
TCP connectivity check passed for subnet "10.1.5.0"

Interfaces found on subnet "169.254.0.0" that are likely candidates for VIP are:
rac3 eth3:169.254.19.73
rac2 eth3:169.254.81.80
rac1 eth3:169.254.100.33

Interfaces found on subnet "10.1.5.0" that are likely candidates for VIP are:
rac3 eth1:10.1.5.102 eth1:10.1.5.202
rac2 eth1:10.1.5.101 eth1:10.1.5.201
rac1 eth1:10.1.5.100 eth1:10.1.5.200

Interfaces found on subnet "192.168.5.0" that are likely candidates for a private interconnect are:
rac3 eth3:192.168.5.102
rac2 eth3:192.168.5.101
rac1 eth3:192.168.5.100
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "192.168.5.0".
Subnet mask consistency check passed for subnet "169.254.0.0".
Subnet mask consistency check passed for subnet "10.1.5.0".
Subnet mask consistency check passed.

Node connectivity check passed

Verification of node connectivity was successful.